#3d Printes

If you aren't resin printed solid prints you have to make sure to add holes and vents (top and bottom). If not invited resin will get trapped and eventually explode into a mess. I added drains to the print but for got to add the vents, so I drilled it holes to drain it... Then rinsed in IPA. Another suggestion I recently got was to add a stay if you can't drill it a vent to allow the air in.

If you aren't resin printed solid prints you have to make sure to add holes and vents (top and bottom). If not invited resin will get trapped and eventually explode into a mess. I added drains to the print but for got to add the vents, so I drilled it holes to drain it... Then rinsed in IPA. Another suggestion I recently got was to add a stay if you can't drill it a vent to allow the air in.

#resin #3dprinting

STOP PRINTING HOLLOW MODELS WRONG! 🚨 ​Trapped liquid resin is NOT just a messy clean-up—it's a time bomb! As an expert, I'm telling you: uncured resin inside your prints is DANGEROUS and here's why: ​💥 THE RESIN BOMB: The liquid inside off-gasses as it tries to cure, building pressure until your print cracks and bursts. Say goodbye to your model! ​☣️ HEALTH HAZARD: Leaking uncured resin is a severe skin irritant that causes allergic reactions and sensitization. Plus, you're breathing in toxic VOC fumes. ​ The Fix: You must add multiple drain holes to hollow models. Wash out the liquid. Cure the inside with a UV light. Safety first, or your print (and your skin) will suffer! ​#ResinPrinting #3DPrintingTips #SLA3D #ResinSafety #uvresin

FDM and SLA 3D Printing Services ✅ Looking for fast, reliable, and professional 3D Printing Services? Look no further! At 3D Customisations India, we offer top-notch solutions including FDM 3D Printing, Resin 3D Printing, and SLA 3D Printing for all your prototyping and production needs. Whether you need custom silicone molds, detailed miniatures, or full-fledged batch and on-demand production, our expert team has you covered. Why choose us? High-precision prototyping for inventors, startups, manufacturers, and hobbyists Quick turnaround times with PAN India and International Shipping! Custom solutions—no order too small or too complex Turn your ideas into reality! Contact us today: 📞 Whatsapp/Call: 9873095479 🌐 Visit: www.3dcustomisationsindia.com 📱 DM: @3dcind Experience the best 3D printing in Delhi, India—get your prototypes, models, and production parts made with quality and precision. DM us now to get started! 3D printing, FDM 3D printing, Resin 3D printing, SLA 3D printing, prototyping services, batch production, on-demand production, Bambu Labs, custom silicone molds, 3D printing India, international shipping.

3d printing mold for rubber using clear resin and abslike resin on the Photon P1 by @anycubicofficial #3dprinting #resin3dprinting #anycubic #photonp1 #clearresin

for science I let my elastic resin sit for a month past the expiration date and I can’t believe what happened 😅 at first I thought it evaporated but actually I think it just all clumped together either way 1/10 would not recommend #3dprinting #resin3dprinting #resin3dprints #anycubicphoton

I used to have SO many failed prints when we were prepping GoodBadOrElse drops. Models stuck to the FEP, supports failing halfway through, entire build plates ruined. The fix? Better support placement in @chitubox_official. Now I start with Magic Support, then manually reinforce any weak points. Simple rule: if I’m not confident, I over-support it. Way better than cleaning failed resin out of the vat at 2am. Hundreds of art toys later, can’t remember our last failure. #AD Use code: MakerToast and get 20% off ChituBox Pro or Team! resinprinting, 3dprinting, chitubox, resin3dprinting, 3dprintingtips, 3dprintfails, resinfails, arttoy, designertoys, maker, 3dprinter

Uncured 3-D printing resin expands overtime so the resin print exploded. Be sure to add drain holes to wash out all the resin. #3dprinting #resin3dprinting

Some notes 📝 + This doesn't work for all filaments! We used ABS. + Some of our pieces were too small and the thin parts melted -- definitely want to try again on a larger print. + Make sure to do this in a well ventilated space because of the acetone fumes. Thank you to @azurefilm3d for the inspo!

📝 Some notes: + Make sure to do this in a well ventilated space! ⚠️ + This only works on ASA and ABS filament. + Thin parts might get melty so watch the time! Good luck! 🍀 Enjoy your smooth prints ☺️