#Extractor Sockets

This is our GripEdge RPT Hex with Rounding Prevention Technology! It prevents fasteners from getting damaged and is a complete replacement for your standard tools! If you do run into a rounded fastener then you use our GripEdge G-FORS Broken Bolt Extractor! #mechanictools #enginerepair #handtools #gripedge #technician

This is a seized stud and we are going to use our GripEdge G-FORS deep socket extractor to remove it. The straight-cut, non-tapered design gives you bi-directional control to both tighten and loosen to break seized fasteners or studs free. Then with our GripEdge Foreign Object Removal System (G-FORS) thread in the removal rod and tighten it down to push the stud right out of the extractor. #mechanictools #enginerepair #handtools #mechaniclife #gripedge

This is a damaged Torx Plus fastener, and we’re using our GripEdge RPT Star Plus to remove it. Rounding Prevention Technology (RPT) helps prevent rounding in the first place, and it’s a complete replacement for standard tools. #mechanictools #enginerepair #handtools #technician #gripedge

This is a rounded-out transmission filter drain bolt and we are going to use our GripEdge G-FORS Socket Extractor to remove it. They are a straight-cut, non-tapered design which allows you to tighten and loosen to break seized fasteners free. If your in the field and dont have a direct replacment available you can retighten it back down and use the G-FORS removal rod to push the fastener right out of the extractor and get back on the road. #mechanic #mechanictools #enginerepair #handtools #gripedge

This is a rusted hex fastener and we are going to use our GripEdge 3/8 Drive RPT Hex to remove it. But when dealing with a limted access area our GripEdge RPT Dual Action Drivers are the better tool for the job. Plus they have the same Rounding Preventon Technology in a smaller form factor. #MechanicTools #enginerepair #handtools #mechaniclife #gripedge

This is our GripEdge RPT Hex, featuring Rounding Prevention Technology. It is a complete replacement for standard hex tools and was used here to loosen a rusted, and seized hex fastener. Its primary purpose, however, is to be used on new, undamaged fasteners to prevent rounding and damage from occurring in the first place. #mechanictools #enginerepair #automotiverepair #handtools #gripedge

This exhaust manifold stud is rusted and seized. To remove it, we’re using our GripEdge G-FORS Socket Extractor. Its straight-cut, non-tapered design provides bi-directional control, allowing you to both tighten and loosen the fastener or stud to help break it free. That added control is key when dealing with stubborn, corroded, or seized hardware to prevent it from snapping off. #MechanicTools #exhuastmanifold #handtools #EngineRepair #gripedge

This is a seized fastener and we used our GripEdge Broken Bolt Extractor to remove it. With its straight-cut, non-tapered design that gives you bi-direction control to both tighten and loosen to break seized fasteners free. It also has our GripEdge-Foreign Object Removal System (G-FORS) with the removal sleeve to push the fastener right off of the extractor. #mechanictools #enginerepair #handtools #technician #gripedge

This is how to remove a bolt that broke off at a angle. First we used a carbide burr bit to smooth it out, then used our GripEdge G-FORS Broken Bolt Extractor and the included left handed drill bits to drill it out. After that we used our size 5 extractor which is a straight-cut, non-tapered design that allows you to both tighten and loosen seized fasteners to break them free. #MechanicTools #enginerepair #handtools #TransmissionRepair #gripedge

We’re removing a rusted hex fastener from an oil pan on a piece of heavy equipment using the GripEdge 3/8" Drive RPT Dual Action Driver. Its dual-drive design lets you turn it with either a 3/8" ratchet or a 17 mm wrench, giving you flexibility in tight or awkward access areas. It’s also a complete replacement for standard tools, helping prevent fastener damage before it starts. #mechanictools #enginerepair #technician #heavyequipment #gripedge

This bolt broke off with only 4 threads sticking up. Because it’s a straight-cut, non-tapered design, the GripEdge G-FORS Deep Socket Extractor fully engages and gives you bi-directional control to tighten or loosen. Compared to a tapered extractor that only bites on the top leading edge, ours cuts its own grooves top to bottom on what you hammered onto. #mechanictools #exhaustmanifold #extractortools #brokenbolt #gripedge

This is our GripEdge G-FORS Broken Bolt Extractor! It is a staight-cut, non-tapered design that gives you bi-directional control to tighten and loosen to break seized fasteners free. It also has our GripEdge- Foreign Object Removal System with the removal sleeve to push the fastener right off of the extractor! #mechanictools #enginerepair #handtoolsonly #mechaniclife #gripedge