#Tool Post

I added this feature to an old single-phase lathe, and it’s been a real game-changer for my projects. #latheuprage #lathework #machinist

Single-Point Threading on the Manual Lathe Cutting threads the classic way — one pass at a time. Single-point threading gives full control over pitch, depth, and fit. Whether it’s a custom size or a perfect class fit, this is the machinist’s way to get it done right. #SinglePointThreading #LatheWork #ManualMachining

Machining a cast iron backplate for a 3-jaw chuck. One of the most important steps? Facing the backplate! This ensures it runs true on the spindle and gives your chuck a solid, flat surface to seat against. Skip this, and you'll fight runout the whole time. #LatheWork #MachinistTips #BeginnerMachinist #3JawChuck

Turning on a Precision Matthews PM-1030V lathe Not all machines are created equal. Precision Matthews machines are a breed apart and in virtually all cases, are equipped with higher quality motors, gears, bearings–and most importantly, a higher attention to detail compared with others on the market. We offer a wide range of machines and accessories, anything from budget priced, hobby type machines, to the highest precision, top of the line industrial machines. But whichever model that you choose, you can be sure that you are getting the best value for your money. Check out our full lineup of quality and affordable machines today! Video Credit: Munster-Madness/YT #lathe #lathemachine #lathework #machining #machinist

The tailstock is the movable part of a lathe that sits opposite the headstock. Its main job is to support the free end of a workpiece or hold tools for drilling and reaming. #machining #lathemachine #mechatronics

#GrindingTricks #EasyAndFast #WorkshopHacks #MechanicalEngineering #LatheMachineTips

7” long turn diameter - about 5XD overhang. Easy work😎 #easywork #work #fun #lathe #machine

I was tired of constantly changing tooling in my quick-change tool post, so I machined a dedicated holder from mild steel with a touch of brass to finish it off. Turned, milled, drilled and tapped it from scratch until everything lined up just right — now it clicks into place exactly how it should. That’s one done… but I’ve got plenty more to make so I can have a dedicated holder for all the tools I use most. Simple shop project, super satisfying result. Built, not bought. Full build is up on YouTube 👌 #hfcreators #machining #millingmachine #lathe #tools

Facing in a Lathe Machine is a machining operation used to make the end surface of a workpiece flat and smooth. ⚙️ What is Facing? Facing means removing material from the end of a rotating workpiece so that the surface becomes perpendicular (90°) to the axis of the lathe. Purpose of Facing Make the end surface flat Set the exact length of the job Prepare surface for further machining (drilling, threading, etc.) How Facing is Done Fix the workpiece in the chuck. Mount the single point cutting tool on the tool post. Start the lathe so the workpiece rotates. Move the tool from outside towards the center using the cross slide. The tool cuts the end surface and makes it flat Facing 2.5" inch diameter Shaft #lathe

That tool change never gets old 😮‍🔥 From swap to cut in seconds. Listen to that spindle sing. #OddlySatisfying #CNCVideo #ToolChange #MillingMachine #MachiningLife

Machining 2-7/16-8 Left Hand threads on a new pump shaft for the paper mill. #abom79 #lathework #manualmachining #machineshop #industrialrepair

Machining a large square shaft process on a manual lathe #machining #turning #manualmachinist #lathemechane